6 Best Hardwired Motion Sensor Lights in 2026

The LUTEC is a three-head LED security light rated at 72W and 7500 lumens in 5000K daylight white. The sensor spans a 180 degree angle and reaches up to 69 feet, and the housing carries an IP65 waterproof rating. It provides four modes: test, security, dusk to dawn and manual override.

That output and reach make it the strongest floodlight here, with enough range to cover a wide driveway or an entire side yard. Four modes mean you can use the test mode while you aim the heads at dusk, then settle on security or dusk to dawn. The manual override mode holds the light on for as long as you want, which suits working outside after dark.

Being hardwired, it needs a proper junction connection, and the three heads are heavy enough to need a solid mount. Compared with the LEPOWER at 4000 lumens, the LUTEC nearly doubles the output and adds a third head. Choose it when the area is large and you want the brightest, farthest-reaching light.

The LEPOWER is a hardwired floodlight with two LED heads rated at 40W and 4000 lumens. Its PIR sensor covers 180 degrees and reaches up to 72 feet, and it reacts to people, cars and animals. Both lamp heads and the sensor head can be angled.

A 72 foot range is actually longer than the LUTEC's 69 feet, which is useful when the light is mounted high on a garage and you want early notice down a long drive. At 4000 lumens it is bright without being overwhelming, so it suits a back door or a side yard better than a very large property. The listing does not state a weather rating the way the LUTEC does, so it is worth confirming the housing suits your exposure.

Installation follows the same pattern as any hardwired flood, with the heads aimed after mounting. In ownership it asks for nothing except an occasional wipe of the sensor lens. Next to the Onforu at 3200 lumens, the LEPOWER offers a little more output but no color temperature choice. Pick it when you want long reach at a moderate brightness.

The Onforu is a dual-head hardwired floodlight rated at 32W and 3200 lumens. A switch selects between 3000K warm, 4000K neutral and 6500K cool light. The sensor spans 180 degrees and reaches 19 to 72 feet, and a dusk-to-dawn mode keeps the light at 30% output through the night.

Color choice is rare in outdoor floods, and it is a real plus if you want a warm porch tone or a crisp security white from the same fixture. The 30% dusk-to-dawn level gives a gentle presence all night, then the light ramps up on motion. It is dimmer than the LUTEC and LEPOWER, which makes it better for an entry than a wide lot.

Once mounted, you choose the color at install and rarely touch it again. Against the LUTEC at 7500 lumens, the Onforu gives up brightness for flexibility. Choose it if you care how the light looks on your house, and you want a standby glow instead of full darkness.

The Matane is a 12 inch wired flush-mount ceiling light with 2400 lumens, dimmable output and three color temperatures from 3000K to 5000K. It uses a 360 degree microwave sensor with a light sensor, and it comes with a remote control. Three modes include an AUTO mode that works only when motion is detected in the dark.

The 360 degree sensor is the main feature, since a ceiling-mounted unit can catch someone entering from any direction. The remote lets you tune brightness and color from the doorway without a stepladder. Microwave sensing can pick up movement through thin walls, so it may switch on when someone passes the other side of a partition.

As a ceiling fixture it needs a wired junction box in place of your existing light. In daily use you set the color and dimming once, and the light handles the rest. Compared with the hepside at 18W, the Matane offers a larger fixture with more lumens and a remote. Choose it for a garage, a utility room or a large closet.

The slochi is a 7 inch hardwired flush-mount light with 15W and 1500 lumens. It has a built-in PIR sensor with a 120 degree angle and a 3 to 4 meter range, designed for a mounting height of 2 to 3 meters. Three color temperatures and three sensor modes are offered, and three hold times let you set how long it stays on.

The compact size suits a reach-in closet, a pantry or a small hallway where a big fixture would look out of place. The ON mode bypasses the sensor, while the DAY-OUT style mode activates it only in the dark, so you get both kinds of behavior from one fixture. The 3 to 4 meter range is short, which is fine for a closet but not for a long corridor.

Holding times of different lengths mean you can tune the light so it does not drop out while you are choosing clothes. Compared with the hepside at 8.7 inches, the slochi is smaller and more compact. It is the neat answer for tight spaces.

The hepside is an 8.7 inch hardwired flush-mount LED ceiling light rated at 18W. It offers three color temperatures, 3000K warm white, 4000K neutral and 6500K cool, and a PIR sensor with a 120 degree angle that detects movement within 10 to 20 feet. Three sensing modes include an ON mode that keeps the light on and bypasses the sensor.

It sits in between the compact slochi and the large Matane, which makes it a good match for a walk-in closet, laundry room or hallway. The 10 to 20 foot range is long enough to greet someone entering a mid-size room. The listing does not state a lumen number, so the 18W rating is the best guide to its brightness.

To install it, you replace an existing fixture and wire it to the junction box. After that it needs only an occasional wipe of the lens. Compared with the slochi at 1500 lumens, the hepside is slightly larger with a longer stated range. Choose it for rooms bigger than a closet but smaller than a garage.